Changes to Step #4

Edit by Mark

Edit declined by Jake Devincenzi

Deleted
Added
Unchanged

Step #4 Lines

[* black] Insert the edge of a plastic opening tool between the battery and the rear case near the bottom the iPhoneiPhone to ease it up.
[* black] RunUse the plastic opening tool alongclear tab half way up the right edgeside of the battery and pry up at several points to completely separatecarefully lift it fromout. Don't use the adhesive securing ittool to lever along the side of the rear caselogic board as this will damage the chips located there.
[* black] Insert the edge of a plastic opening tool between the battery and the rear case near the bottom the iPhoneiPhone to ease it up.
[* black] RunUse the plastic opening tool alongclear tab half way up the right edgeside of the battery and pry up at several points to completely separatecarefully lift it fromout. Don't use the adhesive securing ittool to lever along the side of the rear caselogic board as this will damage the chips located there.
[* icon_caution] Do not pry up too hard, as this may permanently deform or puncture the battery.