Olympus D590 Lens Replacement
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Help make this guide better by using the correct tools in images and/or text.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Embrace your inner English teacher and help improve this guide's grammar!
- Author: Joshua
- Difficulty: Difficult
This guide shows how to replace the camera lens and surrounding mechanisms (including the motor).
Embed this guide
Choose a size and copy the code below to embed this guide as a small widget on your site / forum.
Step 1 — Lens ¶
Flip camera so you are looking at the back.
Remove the 3 screws from the rear of the camera behind the lens.
Step 2 ¶
Flip camera so the front lens is facing up.
Unplug lens from logic board.
Step 3 ¶
Flip camera over so the lens is facing down and the back of the camera is facing you.
Gently pull back on the wire that connects logic board to lens assembly so it is no longer connected.
Step 4 ¶
Flip camera so the front is facing you.
Carefully lift lens assembly out of camera.