eufy RoboVac 11S MAX Bumper Replacement
Morgan G and 2 other contributors
Last updated on May 29, 2025
Views: 458
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 14
- Past 30 Days:
- 65
- All Time:
- 458
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Better Introduction
Improve this guide by completing or revising its introduction.
Introduction
Go to step 1 ↓Having the eufy Robovac 11s Max around the house can be a great help. However, issues can occur with the device. The bumper can need a replacement if the vacuum hits walls or has other sensory issues. This guide can help you replace the bumper.
What you need
Tools
-
-
-
Flip the device upside down.
-
Remove the eight screws from under the vacuum where the bumper is placed using a Phillips screwdriver.
Ask FixBot
-
-
-
Disconnect the cable that connects the bumper to the vacuum.
-
Remove the bumper pieces.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
Sam Houston State, Team 7-5, Thornton Spring 2025 Member of Sam Houston State, Team 7-5, Thornton Spring 2025
SHSU-THORNTON-S25S7G5
3 Members
48 Guides authored
