Help
Editing Step 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Use tweezers to gently flip the small locking flaps of the zero force insertion connectors up.

Pull the bottom orange connector cable out of the zero force insertion connector using the tweezers.

Pull the top orange connector cable out of the zero force insertion connector using the tweezers.

Remove the ribbon cables by gently pulling them away from the no-fuss ribbon cable connectors.

Remove the ribbon cables by gently pulling them away from the no-fuss ribbon cable connectors.

Disconnect the main board from the two ports on the left by pulling the main board to the right.

Your contributions are licensed under the open source Creative Commons license.