Unless you have a compelling reason otherwise, you'll want to reenable SIP. Once again, you'll have to go into Recovery Mode just like you did before and open the Terminal.
Enter the following command
Reboot the machine and let it load to the desktop. Open a new terminal window and enter the following command to check the status of SIP
If all was successful, you should get a line back that reads:
System Integrity Protection status: enabled.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.