Skip to main content
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Use a Phillips #1 screwdriver to remove nine (9) 3.2 mm screws from the motherboard.

Two of the screws near the middle of the board are hidden beneath padding.

Use a Phillips #1 screwdriver to remove the one (1) 4.8 mm screw directly below the copper heat sink channel.

Your contributions are licensed under the open source Creative Commons license.