Skip to main content
Help
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

Gently peel the inverter cable ground strap off the cast aluminum frame of the clutch hinges.

While pulling the inverter cable away from its socket on the inverter board, use the tip of a spudger to push the connector out of its socket.

If the connector won't budge from its socket, insert a metal spudger or similar tool into the gap between the connector and its socket and twist to separate the two pieces.

Your contributions are licensed under the open source Creative Commons license.