Help
Editing Step 12 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Prepare two crimp connectors by filling them with dielectric grease.

Use a crimp connector to connect a stripped end of the wire leading from the replacement heating element to the stripped end of the corresponding wire from the coffee maker.

Using a second crimp connector, repeat for the remaining pair of stripped wires.

Using the appropriate crimping tool, crimp the connectors.

Your contributions are licensed under the open source Creative Commons license.