Skip to main content
Editing Step 6 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Grip the exhaust valve at the top of the motor cover.

Lift up on the left side of the exhaust valve and then pull the right side upward to pry apart the motor cover.

There will be some audible popping noises from separating the cover.

Separating the cover takes a firm pull. You may need someone to assist you in pulling the cover apart.

When you remove the cover, make sure to keep the cover close to the motor. There is a short wire that connects the top of the cover to the motor. The wire can be damaged if the cover is separated too far.

Your contributions are licensed under the open source Creative Commons license.