Skip to main content
Help
Editing Step 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

After the edges of the battery are loosened, begin prying up the edge of the logic board. Start at the top and work your way down the side of the board.

To prevent bending/breaking the logic board, do not try to remove the logic board, yet. The dock connector is still embedded in the frame. Again, you are only trying to loosen more of the adhesive.

Your contributions are licensed under the open source Creative Commons license.