Skip to main content
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

In the next few steps, you will loosen the adhesive from underneath the battery, the logic board, and the frame under the battery. Do this slowly, carefully, and evenly. Take care not to puncture the battery or bend the logic board.

Use a plastic opening tool to pry up the adhesive around the three exposed edges of the battery.

Do not try to pry the battery out, just start loosening the adhesive.

Your contributions are licensed under the open source Creative Commons license.