Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying.
Insert the edge of an iPod opening tool between the front glass panel and the black plastic bezel near the home button.
Do not try to pry between the black plastic bezel and the steel rear case.
Pry the bottom edge of the front panel upward, being careful not to bend the glass excessively.
If it is too difficult to pry up the front panel assembly, reheat it and try again.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.