Skip to main content
Help
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Remove the small black mode switch from the front of the controller.

The backplate gets a little stuck on the port at the bottom so you may have to use a prying motion to remove.

Be careful in the next step when pulling the main assembly apart from the backplate. There is a ribbon cable that connects the two parts that must stay in tact.

Remove the backplate from the main assembly by pulling them apart.

Your contributions are licensed under the open source Creative Commons license.