Skip to main content
Help
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 19 guides that include this step.

Step Type:

Drag to rearrange

Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

Pry only under the hinged retaining flap, not the socket itself, or you may break it off the board.

Use the flat end of a spudger to gently back the keyboard ribbon cable out of its socket by pushing first at one side, then the other.

Your contributions are licensed under the open source Creative Commons license.