Skip to main content
Editing Step 7 —

Step Type:

Drag to rearrange

Loosen the fill plug (or dipstick).

Drain the fluid following previous instructions. CAUTION: HOT FLUID.

Place a new crush washer on drain plug. Tighten the drain plug using a Torque Wrench to 36 ft-lb of torque.

Refill with a funnel and 3 quarts of the same fluid as before.

Replace fill plug (or dipstick).

Wait 15 minutes.

Check transmission fluid level. Top off transmission fluid if needed.

Your contributions are licensed under the open source Creative Commons license.