Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 17 guides that include this step.

Step Type:

Drag to rearrange

Disconnect the display cable by gently pulling it straight out of its connector.

Immediately close the retaining flap.

The flap must remain closed when the cable is reinserted during reassembly. Line up the cable with the gold contacts facing down, and gently slide it into the closed connector. Take care not to crimp or damage the cable. When fully inserted, the indentations on the sides should not be visible.

Your contributions are licensed under the open source Creative Commons license.