Help

Editing Step 1 — Add a title

Notice: You are editing a prerequisite guide. Any changes you make will affect all 17 guides that include this step.

Step Type:

Drag to rearrange

Lay the iMac display-side down on a flat surface.

Loosen the three Phillips screws securing the rear panel to the iMac.

These screws are captive in the iMac. The center screw will stop turning after about 3.5 turns and the outer screws will stop turning after about 5.5 turns. Do not try to remove these screws from your iMac.

Your contributions are licensed under the open source Creative Commons license.