Skip to main content
Editing Step 8 —

Step Type:

Drag to rearrange

Finally we turn to the peripherals on the periphery of the device.

The keyboard connector is still a piece of cake to remove. It's held in with two Phillips screws, and the ribbon cable is held in with a little double-sided adhesive.

The upper components are a different story. The antennas are each connected to the chassis by a pair of copper tape strips.

This conductive adhesive is malleable, easy to tear, and difficult to replace unless you have some on hand. We're not happy to see this inclusion as it makes reassembly more difficult and costly.

Your contributions are licensed under the open source Creative Commons license.