Skip to main content
Help
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 13 guides that include this step.

Step Type:

Drag to rearrange

Lift the display up from the frame and remove it from the iMac.

It may be necessary to slowly lift from one side to peel against the remaining adhesive.

Be very careful handling the display—it's big, heavy, and made of glass.

After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide to replace the adhesive strips that secure the display to the rear enclosure.

Your contributions are licensed under the open source Creative Commons license.