Skip to main content
Help
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Slightly lift the AirPort/Bluetooth card and pull it straight out its socket.

Do not use excessive force to pull the end of the AirPort/Bluetooth card away from its socket on the logic board. Doing so may damage the socket.

When reinstalling the card, be sure it is properly seated before reinstalling the retaining screws.

If the AirPort/Bluetooth card is properly seated, its screw holes should align with those on the logic board.

Your contributions are licensed under the open source Creative Commons license.