Skip to main content
Help
Editing Step 7 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Gently pull the motherboard away from the lens.

Flip the camera over.

Connecting the motherboard to the front case are seven wires.

Desolder the seven wires.

If you are only removing the motherboard as an intermediate step to get to other components, do not desolder yet, as not all wires need to be removed.

Be careful when desoldering the wires. If you do not know how to properly desolder a wire, seek help to prevent damage to the motherboard. Also, make sure the soldering crunches don't fall into the lens case.

Your contributions are licensed under the open source Creative Commons license.