Skip to main content
Help
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Unscrew the clutch springs with a piece of flat metal.

Lift off the clutch cover and withdraw the clutch operating rod and clutch plates.

Engage a gear and undo the clutch retaining nut. This is likely to be tight; it will undo more easily if you "shock" it loose with light hammer taps onto a socket driver.

If you are lucky, the clutch will be loose on the shaft. If it is stuck fast, you may need to use the special puller.

Your contributions are licensed under the open source Creative Commons license.