Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help
Editing Step 15 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Remove the following screws securing the logic board to the rear case:

Two 1.9 mm Phillips screws

One 2.3 mm standoff screw

Standoff screws are best removed using an iPhone Standoff Screwdriver Bit and driver handle.

In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Your contributions are licensed under the open source Creative Commons license.