Skip to main content

Samsung Galaxy S7 Screen Replacement

Editing Step 5 —

Step Type:

Drag to rearrange

Slide the opening pick down the side of the phone, separating the adhesive.

The display cable is located just above the midpoint on this side, and may interfere with your pick if you pry too deeply.

Go slowly so that the tip doesn't slip out of the seam. If sliding becomes difficult, reheat and reapply the iOpener.

Leave the pick in place and grab a second pick as you proceed to the next step. Leaving the pick inserted can help prevent the glue you just separated from re-adhering.

Your contributions are licensed under the open source Creative Commons license.