Help
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 45 guides that include this step.

Step Type:

Drag to rearrange

Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.

The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.

To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.

Your contributions are licensed under the open source Creative Commons license.