Skip to main content
Help
Editing Step 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

With the LCD lifted, disconnect the LCD cable by pulling down.

The LCD cable is attached to the underside of the power supply; be careful where you put your fingers so you don't get zapped by a capacitor.

On reassembly, you may find it helpful to remove the power supply, reconnect the LCD power cable, and then reinstall the power supply.

Alternatively, the LCD power cable can be disconnected from the LCD, rather than the power supply.

Your contributions are licensed under the open source Creative Commons license.