Skip to main content
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Lay the iMac down on a table before you remove the LCD so that it doesn't fall.

Remove the eight 12 mm T8 Torx screws securing the display panel to the rear case.

Lift the right side of the display panel a few inches up from the iMac.

Do not lift the LCD all the way up; there are still connectors attaching the LCD to the internals.

Your contributions are licensed under the open source Creative Commons license.