Skip to main content
Help
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 33 guides that include this step.

Step Type:

Drag to rearrange

Use the tip of a spudger to flip up the I/O board data cable lock and rotate it toward the battery side of the computer.

Use the flat end of a spudger to slide the I/O board data cable straight out of its socket on the logic board.

Do not lift up on the I/O board data cable, as its socket is very fragile. Pull the cable parallel to the face of the logic board.

Your contributions are licensed under the open source Creative Commons license.