Skip to main content
Help
Editing Step 10 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 19 guides that include this step.

Step Type:

Drag to rearrange

Remove the following six screws securing the logic board to to the upper case:

One 2.6 mm T5 Torx screw

Two 5.8 mm T5 Torx screws

One 3.8 mm T5 Torx screw

One 5.2 mm Raised Head T5 Torx screw

One 3.5 mm Silver T5 Torx screw

Your contributions are licensed under the open source Creative Commons license.