Skip to main content
Help
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Line up the small SATA connectors so that the narrow side of the connector on the SSD matches the narrow side on the enclosure connector.

Slide the drive in through the front of the enclosure until the SATA connector is fully seated.

The SSD connects with the enclosure in only one way. If the connectors are not lining up, rotate the SSD and try again.

Your contributions are licensed under the open source Creative Commons license.