Skip to main content
Help
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

In the following steps, you will separate the display panel by slicing though the adhesive bonding the display to the Pixel's chassis.

For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel.

Inserting an opening tool deeper than 1.5 mm into the sides of the device, or 9 mm into the top and bottom can permanently damage the display.

Your contributions are licensed under the open source Creative Commons license.