Skip to main content
Help
Editing Step 6 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Use a spudger to pry up the black and white coaxial cables attached to the upper right and left-hand sides of the motherboard.

Coaxial cable connectors and sockets are fragile. To avoid damaging the connectors, be sure to gently pry them straight up with your spudger.

To reconnect these cables, use tweezers to position each one carefully over its socket on the board, and then press it straight down until it snaps into place.

Your contributions are licensed under the open source Creative Commons license.