Help
Editing Step 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Use a T8 Torx security screwdriver to remove the eleven 10mm silver screws from the metal plate.

Use a Phillips #1 screwdriver to remove the eleven 4mm black screws from the metal plate.

Use a spudger to disconnect the three antenna cables (two black and one white) by prying them straight up from their sockets.

Your contributions are licensed under the open source Creative Commons license.