Skip to main content
Help
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Use a T8 Torx Security screwdriver to remove five screws from the rear of the device.

Two 31mm screws.

Three 10mm screws for the 7000 models; Two gray 10mm screws (upper and lower screws on the illustration) if the PS4 Pro is a 7100-series model.

Remove the metal plate by pulling it up.

Your contributions are licensed under the open source Creative Commons license.