Skip to main content

Swagtron T3 Cover Replacement

Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Be careful with the small blue capacitors indicated by the orange box. There are many of these capacitors in the device.

Slowly lift the backside cover.

Both sides lift up the same way, but the motherboard is under one side and the battery is under the other.

Detach the four cables connected to the cover by pinching the connector clips and pulling the cables out:

Three cables on the motherboard side.

Two red cables with white connectors and one white cable with a white connector.

One yellow cable with a black connector on the battery side.

After detachment, you should be able to completely remove the backside cover.

Your contributions are licensed under the open source Creative Commons license.