Skip to main content

Fix Your Stuff

Right to Repair

Store

Help
Editing Step 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 28 guides that include this step.

Step Type:

Drag to rearrange

Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

To reduce the risk of a short, you can insert a battery blocker or a modified opening pick to disconnect the battery.

The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.

Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.

Your contributions are licensed under the open source Creative Commons license.