Skip to main content
Editing Step 7 —

Step Type:

Drag to rearrange

First we'll tackle the top half of the controller case. If you enjoyed pulling the weights out, get excited. This is pretty much the same.

There are membrane switches under the plastic buttons. First lift out the membrane switches, then the buttons.

If you're careful you can just flip the controller case over and the buttons will fall out.

You cannot remove the bumper buttons without breaking the plastic hinge that holds them (shown in the last photo). If you need to replace these buttons I suggest carefully cutting off the top of the hinge to remove the old buttons. Then you can use a dab of hot glue or something similar to hold the new ones on.

Your contributions are licensed under the open source Creative Commons license.