Skip to main content
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Slide the inverter toward the edge of the mid-plane, then lift it out of the iMac.

Be careful to not pry up against the RAM brackets.

When reinstalling the inverter, press the blue and white cables down in the edge of the midplane before lowering the inverter down into the midplane. The black cable can be routed near the hard drive thermal sensor cable.

Your contributions are licensed under the open source Creative Commons license.