Skip to main content
Editing Step 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

The ZIF connector can be removed by flipping the small black holder into the upright position and then sliding the ribbon cable out carefully.

Once this has been done, use tweezers to unplug the flat topped connector for the lens’ circuit board from the motherboard.

DO NOT force the ribbon cables or they will rip.

Refer to the (Recognizing & Disconnecting Cable Connectors) page for assistance.

Your contributions are licensed under the open source Creative Commons license.