Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Remove the following seven screws securing the logic board to the rear aluminum panel.

Six 2.1mm Phillips #00

One of these screws, at the top of the logic board, is tucked beneath the headphone jack assembly cable. Take care to hold the cable out of the way while removing and replacing this screw.

One 2.5mm Phillips #00

Your contributions are licensed under the open source Creative Commons license.