Editing Step 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Using tweezers, remove the ribbon strip by pulling on it. This will remove the connection.

Push down on the three wires with the metal spudger and the clip will disconnect from the motherboard.

During reassembly, remove the black tape on the ribbon cable, turn the camera upside down so you can see the port, and reinsert the cable with tweezers. It's a lot easier!

Your contributions are licensed under the open source Creative Commons license.