Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

There is now nothing securing the bezel to the laptop body. However, there are still two cables connecting the bezel to the mainboard. Ensure the bezel remains in place until the cables are disconnected.

Flip the laptop back over.

Locate the small trackpad ribbon cable and use the opening tool to lift the black flap on the connector.

With tweezers, gently pull the ribbon cable out of the connector.

You can use the clear plastic tab on the top of the ribbon connector to help pull the cable out.

Your contributions are licensed under the open source Creative Commons license.