Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

Use the tip of a spudger to lift the left fan connector straight up from its socket on the logic board.

Be sure to only pry up on the connector itself not on the socket or you may damage the machine.

It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.

Remove the left fan from the case.

Your contributions are licensed under the open source Creative Commons license.