Nine Phillips screws secure the motherboard to the rear case.
Two Phillips screws secure the daughterboard to the rear case.
Two Phillips screws and a small amount of adhesive hold the speaker to the rear case. Light prying is required after screw removal.
The front-facing camera is held in place by pressure from the motherboard and by tabs in the rear case. It is easy to remove the camera after the motherboard is removed.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.