Help
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Begin by removing the 5 screws (located: 2 screws on either side and 1 screw on the bottom) using the PH000 head in the Precision Phillips Screwdriver.

These screws were missing in our example. These screws should have been small Phillips PH000 screws 1.5mm in length.

These screws are very small. To keep from losing any pieces, place all small metals on a magnetic project mat.

Your contributions are licensed under the open source Creative Commons license.