Skip to main content
Editing Step 7 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Flip the machine over so that the bottom is facing straight up. Then unscrew the four feet on the device with a #2 Phillips head screwdriver. The screws will stay in the rubber feet.

Next, remove the four 8mm screws on the four sides of the machine. You do not need to unscrew the screws on the front end corners.

Once the feet and screws are undone gently pull the metal plate off.

Your contributions are licensed under the open source Creative Commons license.