Skip to main content
Help
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Ensure the camera is turned off and the battery is removed.

Using a Phillips #000 screwdriver, remove the four 2-mm screws from the side of the camera.

Remove the two 3-mm screws from the other side of the camera.

Finally, remove the three 4-mm screws from the bottom of the camera.

Your contributions are licensed under the open source Creative Commons license.