Skip to main content
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Turn off and unplug the device before starting replacement.

Flip the device so that the screen faces down, with the back facing up.

The back panel attaches to the device with four 4.0mm long screws, one at each corner, indicated by the red circles in the picture.

Unscrew the four screws with a PH000 screwdriver.

Your contributions are licensed under the open source Creative Commons license.