Get quick access to guides, parts, and answers for your devices
Looks like your cart is empty
Connect both the SATA data and SATA power connectors to their respective sockets on the SSD.
Peel the backing off of the double sided tape.
Carefully set the SSD into the iMac optical bay as close to the lower left corner as possible.
Do not repeatedly stick and un-stick the tape, as the adhesive will become weaker.
Once you are happy with the SSD's placement, firmly press down along its edges to ensure full adhesion.
When re-installing the optical drive, the SATA cable will be sandwiched between the foam padding and the optical drive.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.