Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Remove two of the three 6 mm T6 Torx screws securing the left side of the display to the upper case.

We purposely have you leave one screw attaching the display to the upper case to aid in future steps.

The display assembly and MacBook body can be subtly misaligned on reassembly. With all six T6 Torx screws in place and the notebook closed, check for alignment. Loosen these six screws to correct the alignment if necessary, and then re-tighten them.

Your contributions are licensed under the open source Creative Commons license.